Ik heb een DS207+ en probeer een playlist (*.wpl formaat) te starten op mijn ShowCenter 200. De playlist is zichtbaar, maar alleen als directory. Ik kan de liedjes alleen afzonderlijk selecteren en afspelen. Hoe start ik het afspelen van een playlist? Is dit een probleem van de media server op de DS207+ of is dit een probleem van de ShowCenter 200?

Met de nieuwste firmware 21-85 (beta) gaat het wel goed. Maar ik ben al overgestapt op SwissCenter. Nu moet ik alleen nog uitvinden hoe ik SwissCenter installeer op mijn NAS. Ik heb wel wat forums gevonden, maar ik ben geen Unix expert.

Klaasvaak/,

bedankt voor je uitleg, het werkt als een speer.

Ik heb toch nog wat vraagjes:
- Heb je ook de web optie aan de praat gekregen?
- een oplossing voor de hele trage fotoshow?


Alvast bedankt!

Klaas,

Video via mijn Pinnacle 1000G werkt met jouw oplossing uitstekend, ook de ondertiteling gaat goed. Ik heb ook geen last van stotterend beeld of zo.

Klaas,

ik heb alleen jouw aanpassingen geìnstalleer, maar ik heb eerder een poging gedaan Twonkey te installeren werket niet en weer gedeìnstalleerd, misschien heeft dat er mee te maken.

regel 102  
#DocumentRoot "/var/services/web"   staat dus uitregel 113
  <Directory />
    Options FollowSymLinks
    AllowOverride All
</Directory>
regel 128
<Directory "/var/services/web">
    #
    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
    #
    # Note that "MultiViews" must be named *explicitly* --- "Options All"
    # doesn't give it to you.
    #
    # The Options directive is both complicated and important.  Please see
    # http://httpd.apache.org/docs/2.2/mod/core.html#options
    # for more information.
    #
    Options MultiViews

    #
    # AllowOverride controls what directives may be placed in .htaccess files.
    # It can be "All", "None", or any combination of the keywords:
    #   Options FileInfo AuthConfig Limit
    #
    AllowOverride All

    #
    # Controls who can get stuff from this server.
    #
    Order allow,deny
    Allow from all
   
</Directory>
de paden van swiss center
/volume1/photo
/volume1/video


#
# This is the main Apache HTTP server configuration file.  It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# what they do.  They're here only as hints or reminders.  If you are unsure
# consult the online docs. You have been warned.  
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path.  If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "@@ServerRoot@@" will be interpreted by the
# server as "@@ServerRoot@@/logs/foo.log".

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path.  If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk.  If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
#
ServerRoot "/usr/syno/apache"

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#
#Listen 12.34.56.78:80
Listen 80

#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule ssl_module modules/mod_ssl.so
LoadModule rewrite_module modules/mod_rewrite.so

<IfModule !mpm_netware_module>
#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.  
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
#
User admin
Group users
</IfModule>

# 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition.  These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed.  This address appears on some server-generated pages, such
# as error documents.  e.g. admin@your-domain.com
#
ServerAdmin admin

#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#
ServerName *:80

#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
#DocumentRoot "/var/services/web"

#
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
#
# First, we configure the "default" to be a very restrictive set of
# features.  
#
<Directory />
    Options FollowSymLinks
    AllowOverride All
</Directory>

#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#

#
# This should be changed to whatever you set DocumentRoot to.
#
<Directory "/var/services/web">
    #
    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
    #
    # Note that "MultiViews" must be named *explicitly* --- "Options All"
    # doesn't give it to you.
    #
    # The Options directive is both complicated and important.  Please see
    # http://httpd.apache.org/docs/2.2/mod/core.html#options
    # for more information.
    #
    Options MultiViews

    #
    # AllowOverride controls what directives may be placed in .htaccess files.
    # It can be "All", "None", or any combination of the keywords:
    #   Options FileInfo AuthConfig Limit
    #
    AllowOverride All

    #
    # Controls who can get stuff from this server.
    #
    Order allow,deny
    Allow from all
   
</Directory>

#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
<IfModule dir_module>
    DirectoryIndex index.html index.htm index.cgi index.php index.php3
</IfModule>

#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#
<FilesMatch "^.ht">
    Order allow,deny
    Deny from all
    Satisfy All
</FilesMatch>

#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
#ErrorLog /var/log/httpd-user.log
ErrorLog /dev/null

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
#LogLevel debug
LogLevel warn

<IfModule log_config_module>
    #
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    #
    LogFormat "%h %l %u %t "%r" %>s %b "%{Referer}i" "%{User-Agent}i"" combined
    LogFormat "%h %l %u %t "%r" %>s %b" common

    <IfModule logio_module>
      # You need to enable mod_logio.c to use %I and %O
      LogFormat "%h %l %u %t "%r" %>s %b "%{Referer}i" "%{User-Agent}i" %I %O" combinedio
    </IfModule>

    #
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here.  Contrariwise, if you *do*
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and *not* in this file.
    #
    CustomLog /dev/null common

    #
    # If you prefer a logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #
    #CustomLog logs/access_log combined
</IfModule>

<IfModule alias_module>
    #
    # Redirect: Allows you to tell clients about documents that used to
    # exist in your server's namespace, but do not anymore. The client
    # will make a new request for the document at its new location.
    # Example:
    # Redirect permanent /foo http://www.example.com/bar

    #
    # Alias: Maps web paths into filesystem paths and is used to
    # access content that does not live under the DocumentRoot.
    # Example:
    # Alias /webpath /full/filesystem/path
    #
    # If you include a trailing / on /webpath then the server will
    # require it to be present in the URL.  You will also likely
    # need to provide a <Directory> section to allow access to
    # the filesystem path.

    #
    # ScriptAlias: This controls which directories contain server scripts.
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the target directory are treated as applications and
    # run by the server when requested rather than as documents sent to the
    # client.  The same rules about trailing "/" apply to ScriptAlias
    # directives as to Alias.
    #
    #ScriptAlias /cgi-bin/ "/usr/syno/apache/cgi-bin/"

</IfModule>

<IfModule cgid_module>
    #
    # ScriptSock: On threaded servers, designate the path to the UNIX
    # socket used to communicate with the CGI daemon of mod_cgid.
    #
    #Scriptsock logs/cgisock
</IfModule>

#
# "/usr/syno/apache/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
#<Directory "/usr/syno/apache/cgi-bin">
#    AllowOverride None
#    Options None
#    Order allow,deny
#    Allow from all
#</Directory>

#
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value.  If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain

<IfModule mime_module>
    #
    # TypesConfig points to the file containing the list of mappings from
    # filename extension to MIME-type.
    #
    TypesConfig /usr/syno/apache/conf/mime.types

    #
    # AddType allows you to add to or override the MIME configuration
    # file specified in TypesConfig for specific file types.
    #
    #AddType application/x-gzip .tgz
    #
    # AddEncoding allows you to have certain browsers uncompress
    # information on the fly. Note: Not all browsers support this.
    #
    AddEncoding x-compress Z
    AddEncoding x-gzip gz tgz
    #
    # If the AddEncoding directives above are commented-out, then you
    # probably should define those extensions to indicate media types:
    #
    AddType application/x-compress .Z
    AddType application/x-gzip .gz .tgz

    #
    # AddHandler allows you to map certain file extensions to "handlers":
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action directive (see below)
    #
    # To use CGI scripts outside of ScriptAliased directories:
    # (You will also need to add "ExecCGI" to the "Options" directive.)
    #
    AddHandler cgi-script .cgi

    # For type maps (negotiated resources):
    #AddHandler type-map var

    #
    # Filters allow you to process content before it is sent to the client.
    #
    # To parse .shtml files for server-side includes (SSI):
    # (You will also need to add "Includes" to the "Options" directive.)
    #
    #AddType text/html .shtml
    #AddOutputFilter INCLUDES .shtml
    AddType image/x-icon .ico
</IfModule>

#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type.  The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
MIMEMagicFile /usr/syno/apache/conf/magic

#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
# Forbidden (eg. list files in a directory)
ErrorDocument 403 /webdefault/sample.php?status=403
# Page not found in apache
ErrorDocument 404 /webdefault/sample.php?status=404
# Page not found in thttpd
ErrorDocument 500 /webdefault/sample.php?status=500
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
#

#
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files.  This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
#
#EnableMMAP off
#EnableSendfile off

# Supplemental configuration
#
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.

# Server-pool management (MPM specific)
Include conf/extra/httpd-mpm.conf-user

# Multi-language error messages
#Include conf/extra/httpd-multilang-errordoc.conf

# Fancy directory listings
Include conf/extra/httpd-autoindex.conf-user

# Language settings
Include conf/extra/httpd-languages.conf-user

# User home directories
#Include conf/extra/httpd-userdir.conf

# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf

# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
Listen 8080
<VirtualHost _default_:8080>
DocumentRoot "/volume1/web/swisscenter"
<Directory "/volume1/web/swisscenter">
Options Indexes FollowSymLinks MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
<IfModule mod_dir.c>
DirectoryIndex index.html index.php
</IfModule>
Alias /root/ "/"
</VirtualHost>

# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf

# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf

# Various default settings
Include conf/extra/httpd-default.conf-user

<IfDefine SSL>
# Secure (SSL/TLS) connections
Include conf/extra/httpd-ssl.conf
#
# Note: The following must must be present to support
#       starting without SSL on platforms with no /dev/random equivalent
#       but a statically compiled-in mod_ssl.
#
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
</IfDefine>

AddType application/x-httpd-php .php
LoadModule php5_module /lib/libphp5.so


Klaas en manvanstaal,

Ik heb de handleiding van Klaas tot op de letter gevolgd. Eerste probleem was dat ik niet als root ingelogd was, maar als admin. Klaas, misschien handig als je dit toevoegt aan je handleidng. Maar daarna ging alles goed en heb ik nu exact dezelfde httpd.conf-user als manvanstaal.

Bij het opstarten van //diskstation:8080/config krijg ik de volgende melding: "Warning: shell_exec() [function.shell-exec]: Cannot execute using backquotes in Safe Mode in /volume1/web/swisscenter/base/file.php on line 736"

Enig idee? Gebruiken jullie een andere versie van SwissCenter? Ik heb 1.19 gedownload.

Babachan
Ik heb precies dezelfde melding, maar gewoon je instellingen verder doen en let wel alles werkt verder prima!

Klaas,

Bedankt voor de info.

Ik heb alles gedaan wat je gezegd hebt. Overigens moet je apache ook herstarten als je de php.ini file aangepast hebt. Dit is nog niet helemaal duidelijk in je handleiding.

Ik heb een media locatie "/volume1/video/" toegevoegd en "search for new media" gestart. De status blijft op pending staan en de DS komt niet in de media lijst op de ShowCenter 200. SwissCenter vanuit mijn PC benaderen via //diskstation:8080/ werkt overigens wel. Alleen de lijst met videos is leeg.

Nog suggesties?

Hoi Babachan,

Ik heb een media locatie "/volume1/video/" toegevoegd en "search for new media" gestart. De status blijft op pending staan

De "search for new media"-functie wil via de DS niet altijd goed lukken. Een goed werkend alternatief is handmatig de media search uit te voeren. Dit kan door de volgende link op je PC te gebruiken:
http://diskstation:8080/media_search.phpZolang de media search duurt blijft de webbrowser naar de pagina "zoeken". Wanneer het zoeken voltooid is, krijg je de melding dat de pagina niet weergegeven kan worden. Al je mediabestanden zitten dan in de database.

Diskstation manueel toevoegen via "Add Server" maakt hem wel zichtbaar in de lijst. Alleen niet groen. Maar dat maakt niet. Als je hem selecteer dan werkt het.

Dit is het gevolg van SwissCenter in combinatie met Apache (wanneer je SwissCenter draait samen met Simese heb je dat probleem niet; Simese draait echter alleen op windows PCs). Een simpele oplossing hiervoor is, nadat je de DS handmatig als server aan de ShowsCenter hebt toegevoegd, je de DS de standaardserver maakt. Hierdoor start SwissCenter via de DS automatisch op als je de ShowCenter aanzet.

Overigens moet je apache ook herstarten als je de php.ini file aangepast hebt. Dit is nog niet helemaal duidelijk in je handleiding.

Bedankt voor de suggestie en zal de handleiding aanpassen. Ook het instellen van de DS als standaardserver zal ik toevoegen.

Ben benieuwd naar de resultaten, groeten, Klaas