even kleine wijziging in de install.txt
- een xvf weggehaald
- en voor het downloaden van domoticz even een directory maken waar je de source code wilt plaatsen.
- removed Raspberry Pi part

xyz
Usage: Domoticz [-www <port>] [-verbose <0|1>]
-www <port> Default is: -www 8080
-verbose <0|1> (0 is none, 1 is debug) Default is: -verbose 0
Examples:
Domoticz (this is the same as Domoticz -www 8080 -verbose 0)
Domoticz -www 81 -verbose 1
If Domoticz and the browser are running on the same system you can connect with http://localhost:8080/
To stop the application: press Ctrl-C in the application screen (not in the browser)
Internet Explorer is not supported at the moment, please use another browser like chrome/firefox.
Compiling from source code:
------------------------------------------
Prerequisites: (or in other words, setup your compile enviroment):
Windows:
- VS2010 (headers can be modified to support a less version)
- boost libraries, you probably have to set the correct include/lib folder in the project properties as i did not bootstrap mine
------------------------------------------------------------------------------------------------
Synology:
- Make sure the device is bootstrapped, then:
ipkg install gcc
ipkg install make
ipkg install optware-devel (dont worry about the wget-ssl error)
ipkg install boost-dev
ipkg install boost-thread
ipkg install boost-system
ipkg install boost-date-time
download/install cmake (take a coffee while doing the bootstrap and make commands)
wget http://www.cmake.org/files/v2.8/cmake-2.8.10.tar.gz
tar xvf cmake-2.8.10.tar.gz
cd cmake-2.8.10
./bootstrap
make
make install
cd ..
rm -R cmake-2.8.10
rm cmake-2.8.10.tar.gz
fix known pthread problem:
1) backup the pthread libraries found in /opt/arm-none-linux-gnueabi/lib/ :
mkdir /opt/arm-none-linux-gnueabi/lib_disabled
mv /opt/arm-none-linux-gnueabi/lib/libpthread* /opt/arm-none-linux-gnueabi/lib_disabled
2) Copy the pthread libraries found in /opt/lib
cp /lib/libpthread.so.0 /opt/arm-none-linux-gnueabi/lib/
cd /opt/arm-none-linux-gnueabi/lib/
ln -s libpthread.so.0 libpthread.so
ln -s libpthread.so.0 libpthread-2.5.so
3)
cp /opt/lib/libboost_* /lib
verify http://forum.synology.com/enu/viewtopic.php?p=185512#msg185512
to check your .profile
------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------
Getting the source code:
first make a directory where you want to place the source code and go to that directory
svn checkout svn://svn.code.sf.net/p/domoticz/code/domoticz
cd domoticz
cmake CMakeLists.txt
make
now you should have the binary application, you can start it with
./domoticz
For additional parameters type:
./domoticz -h
Note: Compiling on the Raspberry Pi will take about 15 minutes
To Update to a newer version:
- stop the application (control-c)
(from the domoticz folder)
svn update
cmake CMakeLists.txt
make

Al meer vorderingen? Interssant project!

Eigenlijk dezelfde vraag als pjdamen.

Ik sta te springen om dit op mijn Syno te gaan draaien.

hiermee krijg je de usb RFXCom werkend

https://sourceforge.net/p/domoticz/disc ... bd2f/#8423

zie http://sourceforge.net/p/domoticz/discussion/domobpro/thread/c320feab/

Ik probeer Domoticz ook werkend te krijgen op mijn DS1511 en op een DS412 van een vriend van mij, maar wij lopen allebei tegen hetzelfde probleem aan. Zelf ben ik niet zo'n meester met linux dus ik volg deze handleiding echt netjes tot op de letter. Beide synology's zijn gebootstrapped en als ik de handleiding volg van deze thread loop ik vast bij het commando make. De bootstrap van cmake gaat goed volgens putty en ik krijg dan ook het advies "now run make". Dit doe ik netjes en bij ong. 46% schiet er ineens een hoop tekst voorbij en het laatste wat ik te zien krijg is dit:

/root/cmake-2.8.10/Source/CursesDialog/form/form.h:340: error: expected ';', ',' or ')' before '*' token
/root/cmake-2.8.10/Source/CursesDialog/form/form.h:343: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'field_opts'
/root/cmake-2.8.10/Source/CursesDialog/form/form.h:348: error: expected '=', ',', ';', 'asm' or '__attribute__' before '*' token
/root/cmake-2.8.10/Source/CursesDialog/form/form.h:350: error: expected '=', ',', ';', 'asm' or '__attribute__' before '*' token
/root/cmake-2.8.10/Source/CursesDialog/form/form.h:353: error: expected '=', ',', ';', 'asm' or '__attribute__' before '*' token
/root/cmake-2.8.10/Source/CursesDialog/form/form.h:357: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'form_init'
/root/cmake-2.8.10/Source/CursesDialog/form/form.h:362: error: expected ')' before '*' token
/root/cmake-2.8.10/Source/CursesDialog/form/form.h:387: error: storage class specified for parameter 'form_request_name'
/root/cmake-2.8.10/Source/CursesDialog/form/form.h:389: error: expected ';', ',' or ')' before '*' token
/root/cmake-2.8.10/Source/CursesDialog/form/form.h:392: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'form_opts'
/root/cmake-2.8.10/Source/CursesDialog/form/form.h:394: error: expected ';', ',' or ')' before '*' token
In file included from /root/cmake-2.8.10/Source/CursesDialog/form/fld_arg.c:33:
/root/cmake-2.8.10/Source/CursesDialog/form/form.priv.h:91: error: storage class specified for parameter 'TypeArgument'
/root/cmake-2.8.10/Source/CursesDialog/form/form.priv.h:119: error: expected '=', ',', ';', 'asm' or '__attribute__' before '*' token
/root/cmake-2.8.10/Source/CursesDialog/form/form.priv.h:121: error: expected '=', ',', ';', 'asm' or '__attribute__' before '*' token
/root/cmake-2.8.10/Source/CursesDialog/form/form.priv.h:122: error: expected '=', ',', ';', 'asm' or '__attribute__' before '*' token
/root/cmake-2.8.10/Source/CursesDialog/form/form.priv.h:123: error: expected ';', ',' or ')' before '*' token
/root/cmake-2.8.10/Source/CursesDialog/form/form.priv.h:124: error: expected ')' before '*' token
/root/cmake-2.8.10/Source/CursesDialog/form/form.priv.h:125: error: expected ')' before '*' token
/root/cmake-2.8.10/Source/CursesDialog/form/form.priv.h:127: error: expected ')' before '*' token
/root/cmake-2.8.10/Source/CursesDialog/form/form.priv.h:128: error: expected ')' before '*' token
/root/cmake-2.8.10/Source/CursesDialog/form/form.priv.h:129: error: expected ')' before '*' token
/root/cmake-2.8.10/Source/CursesDialog/form/form.priv.h:130: error: expected ')' before '*' token
/root/cmake-2.8.10/Source/CursesDialog/form/form.priv.h:131: error: expected '=', ',', ';', 'asm' or '__attribute__' before '*' token
/root/cmake-2.8.10/Source/CursesDialog/form/form.priv.h:132: error: expected ')' before '*' token
/root/cmake-2.8.10/Source/CursesDialog/form/form.priv.h:133: error: expected ')' before '*' token
/root/cmake-2.8.10/Source/CursesDialog/form/form.priv.h:134: error: expected ')' before '*' token
/root/cmake-2.8.10/Source/CursesDialog/form/fld_arg.c:63: error: expected ')' before '*' token
/root/cmake-2.8.10/Source/CursesDialog/form/fld_arg.c:86: error: expected ';', ',' or ')' before '*' token
/root/cmake-2.8.10/Source/CursesDialog/form/fld_arg.c:89: error: old-style parameter declarations in prototyped function definition
/opt/include/ncurses.h:198: error: parameter name omitted
/root/cmake-2.8.10/Source/CursesDialog/form/fld_arg.c:89: error: expected '{' at end of input
make[2]: *** [Source/CursesDialog/form/CMakeFiles/cmForm.dir/fld_arg.c.o] Error 1
make[1]: *** [Source/CursesDialog/form/CMakeFiles/cmForm.dir/all] Error 2
make: *** [all] Error 2
DiskStation>

Ik heb het inmiddels ook met andere versies van cmake geprobeerd, maar allemaal geven ze deze foutmelding. Ook heb ik alle optware en bootstrap verwijdert en opnieuw geinstalleerd om te kijken of het hier aan zou liggen, maar naar mijn idee werkt dat allemaal goed. Een beetje googlen naar de error geeft niet veel helpende resultaten. De meeste mensen die een error met cmake krijgen hebben deze bij de bootstrap, maar dat doet hij dus netjes. Iemand een idee waar dit aan zou kunnen liggen?

Ik heb het voor de zekerheid nog eens geprobeerd met bovenstaande link.
Het resultaat is helaas hetzelfde. EDIT: Ik heb overigens een DS1511 en volgens bovenstaande link zou ik syno-i686-bootstrap_1.2-7_i686.xsh moeten gebruiken voor bootstrap.

Ik zal mijn stappen eens beschrijven, wie weet doe ik iets heel doms verkeerd.
Via Putty maak ik contact met de NAS en log in met de root account.

wget http://ipkg.nslu2-linux.org/feeds/optware/syno-i686/cross/unstable/syno-i686-bootstrap_1.2-7_i686.xsh

sh syno-i686-bootstrap_1.2-7_i686.xsh

rm syno-i686-bootstrap_1.2-7_i686.xsh

Hierna een reboot van de NAS en na de reboot ipkg update via putty.

ipkg install gcc

ipkg install make

ipkg install optware-devel

ipkg install boost-dev

ipkg install boost-thread

ipkg install boost-system

ipkg install boost-date-time

wget http://www.cmake.org/files/v2.8/cmake-2.8.10.tar.gz

tar xvf cmake-2.8.10.tar.gz

cd cmake-2.8.10

./bootstrap

make (en hier gaat het na 46% fout)

De error die ik krijg is de volgende (meer kan ik niet zien in putty, of is er ergens een log aanwezig?):

/opt/include/ncurses.h:773: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'wdelch'
/opt/include/ncurses.h:774: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'wdeleteln'
/opt/include/ncurses.h:775: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'wechochar'
/opt/include/ncurses.h:776: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'werase'
/opt/include/ncurses.h:777: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'wgetch'
/opt/include/ncurses.h:778: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'wgetnstr'
/opt/include/ncurses.h:779: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'wgetstr'
/opt/include/ncurses.h:780: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'whline'
/opt/include/ncurses.h:781: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'winch'
/opt/include/ncurses.h:782: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'winchnstr'
/opt/include/ncurses.h:783: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'winchstr'
/opt/include/ncurses.h:784: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'winnstr'
/opt/include/ncurses.h:785: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'winsch'
/opt/include/ncurses.h:786: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'winsdelln'
/opt/include/ncurses.h:787: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'winsertln'
/opt/include/ncurses.h:788: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'winsnstr'
/opt/include/ncurses.h:789: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'winsstr'
/opt/include/ncurses.h:790: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'winstr'
/opt/include/ncurses.h:791: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'wmove'
/opt/include/ncurses.h:792: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'wnoutrefresh'
/opt/include/ncurses.h:793: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'wprintw'
/opt/include/ncurses.h:795: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'wredrawln'
/opt/include/ncurses.h:796: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'wrefresh'
/opt/include/ncurses.h:797: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'wscanw'
/opt/include/ncurses.h:799: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'wscrl'
/opt/include/ncurses.h:800: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'wsetscrreg'
/opt/include/ncurses.h:801: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'wstandout'
/opt/include/ncurses.h:802: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'wstandend'
/opt/include/ncurses.h:803: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'wsyncdown'
/opt/include/ncurses.h:804: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'wsyncup'
/opt/include/ncurses.h:805: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'wtimeout'
/opt/include/ncurses.h:806: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'wtouchln'
/opt/include/ncurses.h:807: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'wvline'
/opt/include/ncurses.h:1252: error: storage class specified for parameter 'MEVENT'
/opt/include/ncurses.h:1254: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'getmouse'
/opt/include/ncurses.h:1255: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'ungetmouse'
/opt/include/ncurses.h:1256: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'mousemask'
/opt/include/ncurses.h:1257: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'wenclose'
/opt/include/ncurses.h:1258: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'mouseinterval'
/opt/include/ncurses.h:1259: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'wmouse_trafo'
/opt/include/ncurses.h:1260: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'mouse_trafo'
/opt/include/ncurses.h:1266: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'mcprint'
/opt/include/ncurses.h:1267: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'has_key'
/opt/include/ncurses.h:1271: error: expected '=', ',', ';', 'asm' or '__attribute__' before '_tracef'
/opt/include/ncurses.h:1272: error: expected '=', ',', ';', 'asm' or '__attribute__' before '_tracedump'
/opt/include/ncurses.h:1273: error: expected '=', ',', ';', 'asm' or '__attribute__' before '_traceattr'
/opt/include/ncurses.h:1274: error: expected '=', ',', ';', 'asm' or '__attribute__' before '_traceattr2'
/opt/include/ncurses.h:1275: error: expected '=', ',', ';', 'asm' or '__attribute__' before '_nc_tracebits'
/opt/include/ncurses.h:1276: error: expected '=', ',', ';', 'asm' or '__attribute__' before '_tracechar'
/opt/include/ncurses.h:1277: error: expected '=', ',', ';', 'asm' or '__attribute__' before '_tracechtype'
/opt/include/ncurses.h:1278: error: expected '=', ',', ';', 'asm' or '__attribute__' before '_tracechtype2'
/opt/include/ncurses.h:1288: error: expected '=', ',', ';', 'asm' or '__attribute__' before '_tracemouse'
/opt/include/ncurses.h:1289: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'trace'
In file included from /root/cmake-2.8.10/Source/CursesDialog/form/form.priv.h:34,
                 from /root/cmake-2.8.10/Source/CursesDialog/form/fld_arg.c:33:
/root/cmake-2.8.10/Source/CursesDialog/form/form.h:60: error: storage class specified for parameter 'Form_Options'
/root/cmake-2.8.10/Source/CursesDialog/form/form.h:61: error: storage class specified for parameter 'Field_Options'
/root/cmake-2.8.10/Source/CursesDialog/form/form.h:72: error: storage class specified for parameter '_PAGE'
/root/cmake-2.8.10/Source/CursesDialog/form/form.h:95: error: expected specifier-qualifier-list before 'Field_Options'
/root/cmake-2.8.10/Source/CursesDialog/form/form.h:104: error: storage class specified for parameter 'FIELD'
/root/cmake-2.8.10/Source/CursesDialog/form/form.h:120: error: expected ')' before '*' token
/root/cmake-2.8.10/Source/CursesDialog/form/form.h:121: error: expected ';' before '_Bool'
/root/cmake-2.8.10/Source/CursesDialog/form/form.h:126: error: storage class specified for parameter 'FIELDTYPE'
/root/cmake-2.8.10/Source/CursesDialog/form/form.h:143: error: expected specifier-qualifier-list before 'Form_Options'
/root/cmake-2.8.10/Source/CursesDialog/form/form.h:157: error: storage class specified for parameter 'FORM'
/root/cmake-2.8.10/Source/CursesDialog/form/form.h:159: error: expected ')' before '*' token
/root/cmake-2.8.10/Source/CursesDialog/form/form.h:266: error: expected '=', ',', ';', 'asm' or '__attribute__' before '*' token
/root/cmake-2.8.10/Source/CursesDialog/form/form.h:277: error: expected '=', ',', ';', 'asm' or '__attribute__' before '*' token
/root/cmake-2.8.10/Source/CursesDialog/form/form.h:282: error: expected '=', ',', ';', 'asm' or '__attribute__' before '*' token
/root/cmake-2.8.10/Source/CursesDialog/form/form.h:283: error: expected '=', ',', ';', 'asm' or '__attribute__' before '*' token
/root/cmake-2.8.10/Source/CursesDialog/form/form.h:290: error: expected '=', ',', ';', 'asm' or '__attribute__' before '*' token
/root/cmake-2.8.10/Source/CursesDialog/form/form.h:295: error: expected ')' before '*' token
/root/cmake-2.8.10/Source/CursesDialog/form/form.h:303: error: expected '=', ',', ';', 'asm' or '__attribute__' before '*' token
/root/cmake-2.8.10/Source/CursesDialog/form/form.h:307: error: expected ')' before '*' token
/root/cmake-2.8.10/Source/CursesDialog/form/form.h:327: error: expected ';', ',' or ')' before '*' token
/root/cmake-2.8.10/Source/CursesDialog/form/form.h:330: error: expected ';', ',' or ')' before '*' token
/root/cmake-2.8.10/Source/CursesDialog/form/form.h:333: error: expected ';', ',' or ')' before '*' token
/root/cmake-2.8.10/Source/CursesDialog/form/form.h:335: error: expected ';', ',' or ')' before '*' token
/root/cmake-2.8.10/Source/CursesDialog/form/form.h:338: error: expected '=', ',', ';', 'asm' or '__attribute__' before '*' token
/root/cmake-2.8.10/Source/CursesDialog/form/form.h:340: error: expected ';', ',' or ')' before '*' token
/root/cmake-2.8.10/Source/CursesDialog/form/form.h:343: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'field_opts'
/root/cmake-2.8.10/Source/CursesDialog/form/form.h:348: error: expected '=', ',', ';', 'asm' or '__attribute__' before '*' token
/root/cmake-2.8.10/Source/CursesDialog/form/form.h:350: error: expected '=', ',', ';', 'asm' or '__attribute__' before '*' token
/root/cmake-2.8.10/Source/CursesDialog/form/form.h:353: error: expected '=', ',', ';', 'asm' or '__attribute__' before '*' token
/root/cmake-2.8.10/Source/CursesDialog/form/form.h:357: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'form_init'
/root/cmake-2.8.10/Source/CursesDialog/form/form.h:362: error: expected ')' before '*' token
/root/cmake-2.8.10/Source/CursesDialog/form/form.h:387: error: storage class specified for parameter 'form_request_name'
/root/cmake-2.8.10/Source/CursesDialog/form/form.h:389: error: expected ';', ',' or ')' before '*' token
/root/cmake-2.8.10/Source/CursesDialog/form/form.h:392: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'form_opts'
/root/cmake-2.8.10/Source/CursesDialog/form/form.h:394: error: expected ';', ',' or ')' before '*' token
In file included from /root/cmake-2.8.10/Source/CursesDialog/form/fld_arg.c:33:
/root/cmake-2.8.10/Source/CursesDialog/form/form.priv.h:91: error: storage class specified for parameter 'TypeArgument'
/root/cmake-2.8.10/Source/CursesDialog/form/form.priv.h:119: error: expected '=', ',', ';', 'asm' or '__attribute__' before '*' token
/root/cmake-2.8.10/Source/CursesDialog/form/form.priv.h:121: error: expected '=', ',', ';', 'asm' or '__attribute__' before '*' token
/root/cmake-2.8.10/Source/CursesDialog/form/form.priv.h:122: error: expected '=', ',', ';', 'asm' or '__attribute__' before '*' token
/root/cmake-2.8.10/Source/CursesDialog/form/form.priv.h:123: error: expected ';', ',' or ')' before '*' token
/root/cmake-2.8.10/Source/CursesDialog/form/form.priv.h:124: error: expected ')' before '*' token
/root/cmake-2.8.10/Source/CursesDialog/form/form.priv.h:125: error: expected ')' before '*' token
/root/cmake-2.8.10/Source/CursesDialog/form/form.priv.h:127: error: expected ')' before '*' token
/root/cmake-2.8.10/Source/CursesDialog/form/form.priv.h:128: error: expected ')' before '*' token
/root/cmake-2.8.10/Source/CursesDialog/form/form.priv.h:129: error: expected ')' before '*' token
/root/cmake-2.8.10/Source/CursesDialog/form/form.priv.h:130: error: expected ')' before '*' token
/root/cmake-2.8.10/Source/CursesDialog/form/form.priv.h:131: error: expected '=', ',', ';', 'asm' or '__attribute__' before '*' token
/root/cmake-2.8.10/Source/CursesDialog/form/form.priv.h:132: error: expected ')' before '*' token
/root/cmake-2.8.10/Source/CursesDialog/form/form.priv.h:133: error: expected ')' before '*' token
/root/cmake-2.8.10/Source/CursesDialog/form/form.priv.h:134: error: expected ')' before '*' token
/root/cmake-2.8.10/Source/CursesDialog/form/fld_arg.c:63: error: expected ')' before '*' token
/root/cmake-2.8.10/Source/CursesDialog/form/fld_arg.c:86: error: expected ';', ',' or ')' before '*' token
/root/cmake-2.8.10/Source/CursesDialog/form/fld_arg.c:89: error: old-style parameter declarations in prototyped function definition
/opt/include/ncurses.h:198: error: parameter name omitted
/root/cmake-2.8.10/Source/CursesDialog/form/fld_arg.c:89: error: expected '{' at end of input
make[2]: *** [Source/CursesDialog/form/CMakeFiles/cmForm.dir/fld_arg.c.o] Error 1
make[1]: *** [Source/CursesDialog/form/CMakeFiles/cmForm.dir/all] Error 2
make: *** [all] Error 2
Ik heb echt geen idee wat ik fout doe.

Hallo,
Ik zou ook graag een programma als Domoticz of een gelijkwaardig programma op mijn DS712+ willen laten draaien. Ik heb reeds een RFXCOM usb ontvanger en laat deze draaien op een windows pc.
Is er een mogelijkheid dmv een package om dit te laten draaien op mijn Synology?
Ik heb geen ervaring met Linux etc..

Wie kan mij helpen. Ik denk dat er een hele grote groep mensen graag zo''n package beschikbaar zouden zien, indien mogelijk.