Synology-Forum.nl
Hardware ondersteuning => NAS hardware vragen => Topic gestart door: Anonymous op 21 januari 2007, 13:58:15
-
Heeft iemand anders problemen met de stabiliteit?
Support heeft me al een zwaardere voeding aangeboden, maar dat verhelpt slechts een deel van de problemen
-
Correct, hebben dezelfde issues over de gehele wereld. Heb onderstaande naar Synology gestuurd. Let wel, dit is nadat mijn eerste Synology CS406 teruggestuurd en omgewisseld is voor een wel werkend exemplaar !
As many users I have a problem with stability of the 406. Booting up the system I always have to connect via teh Synology application (connect or manage). In this application the status is always OK, harddisks running at around 30 degrees centigrade. After 1 or 2 times connecting to the CS406 via windows explorer the connection is lost. I then cannot connect anymore without pulling the power plug on the CS406. Nothing reacts anymore. I put the synology application once in manage mode and saw that the system went into some sort of chcksum check mode which went upto around 55% and then stopped (no connection possible anymore, pull the plug only possibility).
I then upgraded to firmware 2.0.3-0430 (dated 2007-02-12) which didn't solve the issue.
I completely lost confidence in the machine, this is not the way to have your critical data protected..... Please help.
Detail info:
CS406
4 x maxtor 6V300F0 running at 30 degrees cent. at reported 279,48GB storage space per disk.
RAID 5 configured.
Disable jumbo frame, MTU is 1500
firmware 2.0.3-0430