Voor diegene die ook een tijdelijk simpele oplossing zoeken om alsnog externe devices willen afsluiten dan wel andere taken uitvoeren.
Heb hier en daar wat gerommeld met de syno ups config files.
En heb in de bash scripts welke getriggerd word als de UPS Offline/Online komt wat aangepast.
Onderstaande kun je zelf van alles invullen.
Maar aangezien ik Domoticz draai voor mijn home automation geef ik geval een power failure een json command naar mijn Raspberry welke op zijn beurt dan weer afsluit.
Onderstaande code heb ik mijn aanpassing rood gearceerd:
Script bevind zich in /usr/syno/bin/
File heet "synoups"
#!/bin/sh
# Copyright (c) 2008-2010 Synology Inc. All rights reserved.
. /usr/syno/bin/synoupscommon
if [ "x$1" = "x" -o "x$1" = "x-h" ]; then
echo "Copyright (c) 2008-2010 Synology Inc. All rights reserved."
echo "Usage: `basename $0` { online | lowbatt | nocomm | fsd }"
exit
fi
SYNOINFO="/etc/synoinfo.conf"
UPSMode=`/bin/get_key_value $SYNOINFO ups_mode`
RUN_HA=$(/usr/syno/sbin/synohacore --is_ha_running)
SZF_HA_RC="/var/packages/HighAvailability/target/etc/rc.ha"
SYNOBOOTBIN="/usr/syno/bin/synobootseq"
case "${UPSMode}" in
[Ss][Nn][Mm][Pp] | [Uu][Ss][Bb])
UPSMaster=1
EnabledKey="ups_enabled"
UPSMonServer="localhost"
;;
*)
UPSMaster=0
EnabledKey="upsslave_enabled"
UPSMonServer=`/bin/get_key_value /etc/synoinfo.conf upsslave_server`
if [ "x$UPSMonServer" = "x" ]; then
UPSMonServer="localhost"
elif [ 0 -lt `echo ${UPSMonServer}|grep -c ':'` ]; then
UPSMonServer="[${UPSMonServer}]"
fi
;;
esac
UPSEnabled=`/bin/get_key_value /etc/synoinfo.conf ${EnabledKey}`
case "$UPSEnabled" in
[Yy][Ee][Ss])
;;
*)
echo "UPS is not enable."
exit
;;
esac
UPSSafeShutdown=`/bin/get_key_value /etc/synoinfo.conf ups_safeshutdown`
case "${UPSSafeShutdown}" in
[Nn][Oo])
UPSSafeShutdown=0;;
*)
UPSSafeShutdown=1;;
esac
SZF_SAFEMODE="/tmp/ups.safedown"
SZF_SAFEMODE_DONE="/tmp/safeModeDone"
SZF_ONBATT="/tmp/ups.onbatt"
SYSLOG() {
logger -p user.err -t synoups "$1"
}
UPSStatusGet() {
ups_stat=`/usr/bin/upsc ups@${UPSMonServer} ups.status 2>/dev/null`
if [ $? -ne 0 ]; then
echo "ERR"
return 255
fi
for status in $ups_stat ; do
case "$status" in
"OL"|"OB"|"LB")
echo "$status"
return
;;
esac
done
echo "ERR"
}
UPSShutdown() {
if [ $UPSMaster -ne 1 ]; then
echo "Slave waits for safe shutdown" >> $SZF_SAFEMODE
touch /var/.NormalShutdown
SYSLOG "UPS waits for safe shutdown."
return
fi
OL=0
LB=0
while [ $OL -ne 2 -a $LB -ne 2 ]; do
sleep 10
St=`UPSStatusGet`
if [ "$St" = "OL" ]; then
OL=`expr $OL + 1`
LB=0
else
LB=`expr $LB + 1`
OL=0
fi
echo "OL=$OL LB=$LB" >> $SZF_SAFEMODE
done
if [ $OL -eq 2 ]; then
synologset1 sys warn 0x11300012
echo "UPS back to On-Line and reboot." >> $SZF_SAFEMODE
$SYNOBOOTBIN --unset-safe-shutdown
telinit 6
elif [ $LB -eq 2 ]; then
touch /var/.NormalShutdown
if [ $UPSSafeShutdown -eq 0 ]; then
echo "Waiting UPS exhausted." >> $SZF_SAFEMODE
SYSLOG "Waiting UPS exhausted."
else
echo "UPS safe shutdown." >> $SZF_SAFEMODE
SYSLOG "UPS safe shutdown."
shutdown_retry=0
while [ $shutdown_retry -ne 3 ]; do
StopUps
/usr/bin/upsdrvctl shutdown
if [ $? -eq 0 ]; then
return 0
fi
shutdown_retry=`expr $shutdown_retry + 1`
echo "UPS shutdown retry ... $shutdown_retry" >> $SZF_SAFEMODE
echo "UPS shutdown retry ... $shutdown_retry" > /dev/kmsg
# omron driver will reset usb (~30s) when command timeout
sleep 40
done
echo "UPS shutdown fail." >> $SZF_SAFEMODE
echo "UPS shutdown fail" > /dev/kmsg
fi
fi
}
UPSSafeMode() {
if [ -f $SZF_SAFEMODE ]; then
return
fi
$SYNOBOOTBIN --is-shutdown
SYSLOG "[UPS] System is shutting down. Ignore onbattery event."
return
fi
SYSLOG "[UPS] Check Boot Status."
$SYNOBOOTBIN --is-ready
while [ $? -ne 0 ]
do
sleep 2
$SYNOBOOTBIN --is-ready
done
St=`UPSStatusGet`
if [ "$St" = "OL" ]; then
SYSLOG "WARNING: UPS is On-Line"
return
fi
echo "$1" > $SZF_SAFEMODE
/usr/syno/bin/synologset1 sys warn 0x11300011
SYSLOG "[UPS] Server is going to Safe Mode. It will stop all services and umount all volumes."
curl 'http://192.x.x.x:8080/json.htm?type=command¶m=system_shutdown' if [ "yes" = "$RUN_HA" ]; then
$SZF_HA_RC ups-safemode
fi
$SYNOBOOTBIN --set-safe-shutdown
# we should hook synopoweroff not only reboot
/usr/syno/sbin/synopoweroff -fr
}
UPSRestart() {
if [ -f $SZF_ONBATT ]; then
rm $SZF_ONBATT
if [ ! -f $SZF_SAFEMODE ]; then
/usr/syno/bin/synologset1 sys info 0x11300012
/usr/syno/bin/synonotify UPSOnAC
fi
fi
curl 'http://192.x.x.x:8080/json.htm?type=command¶m=switchlight&idx=1522&switchcmd=Off' if [ ! -f $SZF_SAFEMODE ]; then
return
fi
echo "UPS back on-line, so wait to reboot" >> $SZF_SAFEMODE
sleep 30
St=`UPSStatusGet`
timeout=$((3*60))
if [ "$St" = "OL" ]; then
SYSLOG "[UPS] Check Safe Mode Done."
while [ ! -f $SZF_SAFEMODE_DONE ] && [ $timeout -gt 0 ]
do
sleep 2
timeout=`expr $timeout - 2`
done
if [ "yes" = "$RUN_HA" ]; then
$SZF_HA_RC ups-restart &
fi
synologset1 sys warn 0x11300012
SYSLOG "UPS back to On-Line and reboot."
$SYNOBOOTBIN --unset-safe-shutdown
telinit 6
fi
}
ONBatt() {
if [ ! -f $SZF_ONBATT ]; then
touch $SZF_ONBATT
SYSLOG "UPS on battery."
curl 'http://192.x.x.x:8080/json.htm?type=command¶m=switchlight&idx=1522&switchcmd=On' fi
}
FLOCK_FILE="/tmp/synoups.lock"
{
flock -x 99
case "$1" in
online)
UPSRestart
;;
onbatt)
ONBatt
;;
lowbatt | nocomm)
UPSSafeMode $1
;;
fsd)
/usr/sbin/upsmon -c fsd
UPSSafeMode $1
;;
fsd)
/usr/sbin/upsmon -c fsd
UPSSafeMode $1
;;
shutdownups)
UPSShutdown
;;
esac
flock -u 99
} 99>$FLOCK_FILE
Topic: Netwerk UPS - kan geen IP adressen meer toevoegen (gelezen 9263 keer)
Vergelijkbare onderwerpen (5)
11 juni 2022, 22:42:19