Synology-Forum.nl
Firmware => Synology DSM 7.3 => Topic gestart door: Birdy op 08 oktober 2025, 11:03:59
-
(2025-10-08)
Important Note
1. After installing this update, you will not be able to downgrade to a previous DSM version.
2. This update will restart your Synology NAS.
3. If auto update does not run, perform a manual update in Control Panel. Before updating, follow the instructions and complete the
required actions to ensure success.
4. To uphold our commitment to quality, every DSM release undergoes rigorous validation. To ensure optimal stability, the models listed below will not receive this update on your device and will remain on their most suitable version. You can only download the upgrade patch from Synology Download Center because you won't receive notifications for this update on your DSM.
FS Series: FS3017, FS2017, FS1018
XS Series: RS18016xs+, RS4017xs+, RS3617xs+, RS3617xs, RS3617RPxs, RS18017xs+, DS3617xs, DS3617xsII, DS3018xs
Plus Series: RS2416RP+, RS2416+, DS916+, DS716+II, DS716+, DS216+II, DS216+, DS1817+, DS1517+, RS2818RP+, RS2418RP+, RS2418+, RS818RP+, RS818+, DS1618+, DS918+, DS718+, DS218+, RS1219+
Value Series: DS116, DS216, DS216play, DS416, DS416play, DS1517, DS1817, DS418play, RS217, RS816
J Series: DS216j, DS416j, DS416slim, DS419slim, DS418j, DS218j, DS119j
5. For the following models, DSM 7.3 will be the last upgradable version.
FS Series: FS3017, FS2017, FS1018
XS Series: DS3018xs, DS3617xs, DS3617xsII, RS18016xs+, RS18017xs+, RS3617xs, RS3617RPxs, RS3617xs+, RS3618xs, RS4017xs+, RS819, RS217
Plus Series: DS216+, DS216+II, DS716+, DS716+II, DS916+, DS718+, DS918+, DS1019+, DS218+, DS1517+, DS1817+, DS1618+, DS1819+, DS2419+, DS2419+II, RS2416+, RS2416RP+, RS2418+, RS2418RP+, RS2818RP+, RS818+, RS818RP+, RS1219+
Value Series: DS116, DS216, DS216play, DS416, DS416play, RS816, DS118, DS218, DS218play, DS418, DS418play, DS1517, DS1817
J Series: DS216j, DS416j, DS416slim, DS419slim, DS418j, DS218j, DS119j
6. Introduced in DSM 7.2.2 and continued in DSM 7.3, media file processing for HEVC (H.265), AVC (H.264), and VC-1 codecs is now handled by end devices to improve system efficiency. These codecs are widely supported on end devices such as smartphones, tablets, computers, and smart TVs. If the end device does not support the required codecs, the use of media files may be limited. Refer to this article for workarounds. In addition, please note the following exceptions:
Surveillance Station on DSM will continue to support server-side processing of AVC (H.264) streams, see the release notes.
Deep Video Analytics (DVA) series models and VisualStation clients will retain support for AVC (H.264) and HEVC (H.265) codecs.
7. PetaSpace has reached end of life and is no longer supported. To create a large volume, see this article.
Compatibility & Installation
Node.js v14, Node.js v16, PHP7.3, PHP7.4, and PHP8.0 are no longer supported.
To ensure compatibility, the following packages will be automatically updated or will require a manual update to a compatible version: Active Backup for Business 3.1.0, Active Backup for Google Workspace 2.2.6, Active Backup for Microsoft 365 2.6.1, Advanced Media Extensions, Antivirus by McAfee, Antivirus Essential, Cloud Sync, Container Manager, Download Station, File Station, Hyper Backup, Hyper Backup Vault, Log Center, Media Server, Note Station, PACS, Presto File Server, Snapshot Replication, Storage Analyzer, Surveillance Station 9.2.0 or below, Synology Chat Server, Synology Drive, Synology Mail Server, Synology MailPlus Server, Synology Photos, Universal Search, and Web Station.
What's New
Added an option to postpone important DSM auto-updates for up to 28 days after the first notification.
Added support for Synology Tiering and Synology Tiering Vault.
Added native exFAT support for external devices, allowing seamless access without additional packages. The exFAT Access package has been discontinued.
Added support for backing up and restoring the "Verify server certificate" setting in LDAP directory service. Restoring this setting requires both the export and import systems to run DSM 7.3 or above.
Added support for selecting organizational units (OUs) to synchronize when joining a domain. In this version, if you need to modify the OU synchronization list after joining the domain, you must leave and rejoin the domain.
Added an option to automatically lock encrypted storage entities during a manual reset (Mode 1). After the reset, the key vault is erased and disabled, and encrypted volumes and shared folders are locked to prevent unauthorized access. This option is set to disabled by default.
Added support for sending OTP emergency recovery codes by email if users cannot receive their OTP during 2-factor authentication for OS login.
Fixed Issues
Fixed an issue where DSM configuration backups or Hyper Backup could fail while Shared Folder Sync tasks were running.
Fixed an issue where residual snapshots from previous backup tasks might cause entire system backups in Active Backup for Business or Hyper Backup to fail.
Fixed an issue where Snapshot Replication tasks might fail due to unexpected errors.
Fixed a security vulnerability regarding curl (CVE-2023-38545).
Fixed a security vulnerability regarding AppleTalk (CVE-2023-51781).
Fixed a security vulnerability regarding krb5 (CVE-2024-37371).
Fixed a security vulnerability regarding PostgreSQL (CVE-2025-1094).
Fixed multiple security vulnerabilities (CVE-2024-12085, CVE-2020-22218, CVE-2024-24806, and CVE-2023-37920).
Opmerkingen:
This version is released in a staged rollout (https://kb.synology.com/nl-nl/DSM/tutorial/DSM_update_why_latest_version_available_online_but_not_in_control_panel).
-
Ik heb eerst 10 packages geüpdatet (mijn gewoonte) en daarna DSM.
Je moet eerst akkoord gaan met:
[attachimg=1]
Verder is de update vloeiend verlopen, heb alleen niet de tijd opgenomen maar, dat is voor ieder anders, mede afhankelijk van het updaten van geïnstalleerde packages.
[attachimg=3]
Alles is zonder problemen verlopen:
[attachimg=2]
-
To ensure optimal stability, the models listed below will not receive this update on your device and will remain on their most suitable version. You can only download the upgrade patch from Synology Download Center because you won't receive notifications for this update on your DSM.
Wat wordt hier juist mee bedoeld? Dat voor deze modellen versie 7.2 beter performed dan 7.3 ?
Want waarom kan je dan upgraden maar wordt de upgrade niet aangeboden?
-
Wat wordt hier juist mee bedoeld? Dat voor deze modellen versie 7.2 beter performed dan 7.3 ?
Ja, het betreft dan ook NASsen die gewoon te zwak zijn of redelijk oud, met in het achterhoofd, dat deze update niet alleen DSM is.
Want waarom kan je dan upgraden maar wordt de upgrade niet aangeboden?
Dan kom je niet in de verleiding om te updaten maar, je kunt dus wel kiezen om toch te updaten.
-
Ja maar dan vind ik het verkeerd.
Ofwel ondersteunen de modellen de nieuwe versie 100% en wordt dit automatisch aangeboden.
Ofwel ondersteunen ze dat niet en kan je niet upgraden.
-
Leg eens een Ticket in en vraag daarin om uitleg.
-
Wat is dan wijsheid..... Mijn DS918+ en DS218+ wel of niet updaten?
De DS220j die ik ook heb is voor mij ook even een vraagteken.
-
Wow zelfs de 18 en 19 modellen zijn nu de echt de sjaak... Voorheen hield synology wat de oudere modellen wat langer in leven qua updates. Mijn DS415+ heeft ruim 8 ofzo? jaar updates gehad.
-
ik zie ds1817+ zowel bij niet update als bij dat hij wel een update krijgen wat is het nu :)
ken hem ook via de officiële Synology site downloaden Dus antwoord is ja
of het verstandig is is een 2de
-
Zoals Danny schreef (In zijn weer gewiste bericht?) zijn de 3th-party drives ook weer te gebruiken op de meeste nas modellen (link (https://kb.synology.com/en-global/DSM/tutorial/Drive_compatibility_policies)). Als ik de link zo bekijk zijn dat de J en de DS+ series. Bij de meest luxe modellen blijven de synology schijven verplicht.
Ik zie nu dat er ook lijsten zijn van disks die expliciet incompatibel zijn. Die schijven blijven, terecht, verboden.
-
Ik heb een DS116, een DS416, een DS218+, een DS918+ en een DS723+ alle probleemloos geupgrade naar DSM 7.3.
-
Nieuw in deze release is onder andere "Synology Tiering " (in Beta beschikbaar.) . Meer informatie is te vinden op :
https://www.synology.com/nl-nl/DSM73 (https://www.synology.com/nl-nl/DSM73) . Als ook komen er rond december nog meer nieuwe features beschikbaar. Meer Enterprise gericht.
Verder bevat deze een minder gedocumenteerde aanpassing maar voor velen hobbyisten denk ik wel interessant, third party drives zijn met deze update weer te gebruiken :https://kb.synology.com/en-global/DSM/tutorial/Drive_compatibility_policies (https://kb.synology.com/en-global/DSM/tutorial/Drive_compatibility_policies) . Al is het advies voor productie toch wel de Synology NAS disken te gebruiken, voor een betere support en stabiliteit van het systeem.
Wel liep ik tijdens installatie tegen een voor mij nieuw venster aan met de vraag of je enkel belangrijke updates automatisch wilt installeren of ook de laatste. Nu ken ik deze optie wel, maar zie ik nergens meer een mogelijkheid om automatische updates uit te schakelen ? Heeft iemand dat al kunnen vinden ? Ik wil niet dat mijn I-Scsi san (draait ook op mijn productie Synology) in ene wegvalt omdat er een update wordt doorgevoerd ...
-
Goede opmerking. Enkel op de + modellen weer teruggedraaid, al had je deze specifieke lock volgens mij nog niet op de hogere modellen, dat je met third party disk geheel geen installatie kon doen (was het geval op x25 + series). Hebben ze ook met de rs2421+ series geprobeerd meen ik me te herinneren, dat je enkel met Synology hdd's een opslagpool kon aanmaken. Maar is toen teruggedraaid omdat de markt er nog niet klaar voor was vermoed ik.
Ik zie nu overigens dat third party drives op de + series ook gewoon nog health monitoring hebben. Iets wat je op de + racks vorige jaren "geblokkeerd" zag. Je kreeg een melding in HDD status -> unverified. Weet even niet of dat nog steeds is op bijv. rs2423+ e.d. .
-
Dat is vrij geduft, zo'n nieuwe release gelijk op al je NAS systemen installeren ;)
Ik moet er weer een avondje voor gaan inplannen vrees ik, aantal websites draaien nog op een oudere php versie die niet meer ondersteund gaat zijn native :S Denk dat ik een docker container moet gaan inzetten met een oudere PHP engine ..
-
Leg eens een Ticket in en vraag daarin om uitleg.
Het antwoord van Synology omtrent mijn vraag waarom de versie niet automatisch wordt aangeboden op sommige NAS.
Usually on entreprise series the automatic update push arrive later.
to ensure maximum stability , because even when a new OS version is released ok and stable, some bugs may still happen, those bug are usually corrected with the release of minor versions
To ensure customer for maximum stability we push them later, still if you want to install them you can manually
As some company production relies on their NAS, updating day 1 is usually not a good practice
-
Die uitleg slaat nergens op, of je hebt de vraag niet goed gesteld of ze snappen het gewoon niet.
-
Dit was mijn vraag:
Hello,
concerning the new update to DSM 7.3
In the releasenotes I found this:
To ensure optimal stability, the models listed below will not receive this update on your device and will remain on their most suitable version. You can only download the upgrade patch from Synology Download Center because you won't receive notifications for this update on your DSM.
My NAS is a DS918+
I don't understand the release notes. Is it better to stay at version 7.2 or better to update to 7.3 ?
Why I don't receive the update like usual and can it only be installed by downloading it from the Synology website?
If the new version is not good enough for DS918+ why do you offer it to upgrade? And if it's good enough, why not via the normal way?
Please explain.
-
Ik heb er nog op gereageerd:
Mijn vraag:
So am I correct that DSM 7.3 is fully supported on the DS918+ and I will receive the update to 7.3 sooner or later when you push the update to my device?
Antwoord Synology:
Dear customer,
So am I correct that DSM 7.3 is fully supported on the DS918+
Yes if not we won't propsoe it.
and the NAS will be end of life
So feel confident your NAS is comùpletely compatible with dsm 7.3
and I will receive the update to 7.3 sooner or later when you push the update to my device?
It should yes.
-
Ik moet zeggen, het is wat onduidelijk allemaal zo. Communicatie kan beter. Ook qua HDD compatibiliteit. Nu is er geen enkele third party disk in de compat lijst te vinden, , als je bijv. WD red gebruikt krijg je nu ook geheel geen melding meer op de nas dat je een niet geverifieerde disk gebruikt o.i.d.. Dan lijkt het dus volledig supported.
-
Ook qua HDD compatibiliteit. Nu is er geen enkele third party disk in de compat lijst te vinden
Dat is niet waar tenzij je het hebt over alleen de 2025 NASsen. ;)
-
Dat is niet waar tenzij je het hebt over alleen de 2025 NASsen. ;)
Ha, ja, dat bedoelde ik inderdaad ;) is een dsm 7.3 draadje, niet een x25+ model draadje.