Synology-Forum.nl
Synology Router => Synology Router => Topic gestart door: leecooper op 01 februari 2018, 13:52:03
-
Hi guys,
Sorry for English in this forum.
I got a RT2600 today and tried to set it up behind Ziggo Connect Box, the white one. I called Ziggo and they settled the box on bridge mode, now oh works to connect to it with 192.168.100.1 to show some info.
If I connect my computer to the box at lan1 I get internet access at full speed.
Now step 2, connect RT2600 to the LAN 1 of the Ziggo box, and I would expect it automatically detect the internet connection and get the ip from the Ziggo box, but this is not the case.
I tried several settings under Network Center, Auto and Manual, but no luck.
Can somebody help with this initial setup?
Thanks
-
[attach=1]
[attach=2]
-
reboot the ziggo box when you connect an other device !!
-
Yes, I restarted about 5 times
(https://uploads.tapatalk-cdn.com/20180201/5e8335c5e48f5f01bbe8f982d35ffe64.jpg)(https://uploads.tapatalk-cdn.com/20180201/3e357fbe68526d2993f936ae01b4cb2d.jpg)
Sent from my iPad using Tapatalk Pro
-
Power off and disconnect everything from the CB., except your WAN.
Power on the CB, then connect the RT on LAN1 of the CB, then turn on the RT, then connect a PC to your RT.
Check your connection.
-
Ha! That worked! Forgot those modems "stick" to the first device plugged in, and that was my pc.
Thanks man!
Sent from my iPad using Tapatalk Pro
-
8)