DS415+ Release NotesVersion: 6.0-7321
(2016/03/24)
Compatibility and Installation
Some features have specific hardware requirements and are only available on certain Synology NAS products.
For security purposes, admin accounts with blank passwords will be disabled after the upgrade, and password change will be required.
Some third-party packages may not be compatible with DSM 6.0; hence disabling the packages before upgrading to DSM 6.0 is necessary.
The current Alias settings in Application Portal will be disabled and require manual configuration after updating to DSM 6.0.
The DDNS of f3322.org is in DSM 6.0 official release due to unclarified domain usage violation. Please refer to
http://www.pubyun.com/p/notice/ for details.
Due to the discontinued support by the open source team, the Asterisk package will no longer be supported after DSM 6.0.
If phpMyAdmin was upgraded during DSM 6.0 Beta 2, you need to uninstall it first so that its latest update will be available at Package Center.
The following packages will not be supported by NVR216 after upgrading to DSM 6.0 (DSM 6.0 for NVR216 will be available at the end of March, 2016):
PHP
Text Editor
Web Station
WebDAV
What’s New in DSM 6.0
Btrfs File System
Set usage/user quota for shared folders.
Enable file compression to increase the flexibility of volume usage.
Perform defragmentation to increase system performance.
Data checksum is enabled by default and data scrubbing can be run to verify data integrity.
When file versioning is enabled in Cloud Station, it will not occupy additional storage on Btrfs file system. On other file systems, file versioning will occupy additional space equal to the size of each shared folder.
Files will be backed up once the backup task is started, even if the files are changed or deleted afterwards.
Converting existing ext4 file system to Btrfs is not supported. To store files under Btrfs file system you must create a new folder.
Available on the following models:
16-series: RS2416RP+, RS2416+, RS18016xs+, DS716+, DS216+
15-series: RC18015xs+, RS815RP+, RS815+, DS3615xs, DS2415+, DS1815+, DS1515+, DS415+
14-series: RS3614xs+, RS3614xs, RS3614RPxs
13-series: RS3413xs+, RS10613xs+
12-series: DS3612xs, RS3412xs, RS3412RPxs
11-series: DS3611xs, RS3411xs, RS3411RPxs
Service Modularization
Some of the DSM built-in features have been modularized into packages to ensure better system maintenance and update flexibility.
Modularization in DSM 6.0 includes Storage Analyzer, Backup & Restore, PHP, Web Station and Text Editor, Log Center (with basic built-in functions in DSM and extensive functions via package download), WebDAV and Snapshot Replication.
64-Bit Architecture
DSM 6.0 has been optimized for all models based on Intel 64-bit processors to improve general performance.
Supports over 4GB memory allocation for one single process to deploy large scale application.
High Availability Manager
When a split-brain error occurs in an HA cluster, you can designate one server as the active server and overwrite the data on the other server. No full data replication is required.
When a split-brain error occurs, you can view the recent system information, iSCSI Target connection history and file difference in each shared folder.
Reduced the time to upgrade a cluster by 50%.
Reduced the time to bind and unbind a cluster by 20%.
Reduced the occurrence of split-brain errors.
Supports Docker DSM.
High Availability Manager for RC18015xs+
Supports Virtual DSM.
Supports Docker DSM.
Backup & Replication
Backup & Replication features are now available in add-on packages Hyper Backup (backup client) and Hyper Backup Vault (backup server). The existing Backup & Replication task settings will be migrated to the new package automatically upon upgrading to DSM 6.0. Some settings are relocated to Control Panel:
rsync: Control Panel > File Services > rsync
Shared Folder Sync: Control Panel > Shared Folder Sync
For features of Hyper Backup and Hyper Backup Vault, please refer to the What’s New in the Packages section.
Security
CSP support can effectively prevent XSS attacks.
TLS/SSL profiles can be adjusted according to your browser compatibility and security requirements.
Root account is replaced by administrators group credentials to log into SSH to enhance security.
Certificate
The integration of Let’s Encrypt helps provide your Synology NAS with secure connection easily and effortlessly.
Multiple certificates are now supported to increase the flexibility for hosting several different hostnames.
File Station
Supports mounting NFS shared folders on folders on Synology NAS.
Aviary photo editor is introduced to replace the existing service for a more intuitive interface.
Multiple files can be downloaded without being compressed into one giant file on Chrome browser (on Windows computers only).
Content Search
Search in File Station now allows you to match the document content or even the metadata of multimedia files for a more effective search result.
You can now use Mac Finder to quickly search the content of indexed files within mounted folders on your Synology NAS.
File sharing
Collect files via the intuitive File Request feature.
Customize the background picture and logo that you see when sharing files.
File sharing and file request have been redesigned for mobile interface to ensure a consistent user experience.
Accessibility
DSM is now accessible to visually impaired users.
Fully supported for accessibility in File Station, Desktop navigation, and Keyboard Shortcuts.
Six modules supported in Control Panel: Shared Folder, File Service, User, Group, QuickConnect, and Update & Restore > Update.
2-Step Verification
You can now add and manage your most frequently used devices as trusted devices without entering verification code every time you log in.
QuickConnect
Relay service can now be disabled to meet enterprise policies.
802.1X
Added support of 802.1X authentication for wired networks.
Firewall
Organize your firewall rules into different profiles.
DHCP Server
Supports standard DHCP options.
Supports vendor specific options.
Supports downloading PXE boot loader files from remote TFTP servers.
SSD Cache
Create an SSD cache consisting of up to 12 SSD devices.
When SSD cache is enabled on a volume with advanced iSCSI LUNs, the performance can be improved up to 30%.
You can now use different SSD models to create an SSD cache.
Storage Manager
Configure the description for volumes and Disk Groups.
For RAID Groups, the number of disks for each RAID Array can be 6, 12 or 24.
Customized Domain Name for DSM
Customized domain name can now be used for accessing DSM more easily.
Application Portal
DSM can now serve as a reverse proxy server.
Customized domain name can now be used for directly accessing Synology applications.
Dynamic DNS Support
Added new DDNS provider TWNIC to support domain names with Traditional Chinese characters.
Web Enhancement
HTTP compression can be enabled to effectively compress packets to reduce the size of web transfer.
HTTP/2 is now supported as an replacement of SPDY to increase the transfer speed for high latency connection.
DSM mobile
Comes with a brand new user interface.
View and update your DSM version directly.
Added support for updating packages in Package Center.
Displays volume and disk information in Storage Manager.
Displays memory composition in Resource Monitor.
Theme Change
Light and dark themes are supported for changing the system style within DSM.
Keyboard Shortcut
When typing in the text fields, keyboard shortcuts will be temporarily disabled to avoid unintentional entries.
Resource Monitor
You can view the throughput, latency, IOPS, IO Size and queue depth of each iSCSI LUN.
Task Scheduler
You can now view the status of last run tasks to monitor the results.
Package Center
Packages are divided into two main categories, Synology and Third-party, for better recognition.
What’s New in Packages
Virtual DSM Manager (Beta)
Run multiple Virtual DSM instances on a single server using the virtualization technology.
Perform live migration of virtual machines by relocating a virtual machine from one host to another in just a few minutes without interruption while keeping its storage unchanged.
4GB RAM or more is required to run Virtual DSM. System with less than 4GB RAM can only be used as a storage resource.
Virtual DSM Manager is not supported on hosts running Synology High Availability.
The beta program will continue after DSM 6.0 official release.
Available on the following models:
16-series: RS2416RP+, RS2416+, RS18016xs+
15-series: RS815RP+, RS815+, DS3615xs, DS2415+, DS1815+, DS1515+, DS415+
14-series: RS3614xs+, RS3614xs, RS3614RPxs
13-series: RS3413xs+, RS10613xs+
12-series: DS3612xs, RS3412xs, RS3412RPxs
11-series: DS3611xs, RS3411xs, RS3411RPxs
Docker DSM (Beta)
Run multiple Docker DSM instances on a single server using the container technology.
A Btrfs volume is required to store Docker DSM data. System data can be backed up and replicated.
Available on the following models:
16-series: RS2416RP+, RS2416+, RS18016xs+, DS716+, DS216+
15-series: RS815RP+, RS815+, DS3615xs, DS2415+, DS1815+, DS1515+, DS415+
14-series: RS3614xs+, RS3614xs, RS3614RPxs
13-series: RS3413xs+, RS10613xs+
12-series: DS3612xs, RS3412xs, RS3412RPxs
11-series: DS3611xs, RS3411xs, RS3411RPxs
Snapshot Replication
Snapshot Replication is now a stand-alone package. It is previously named as Snapshot & Replicationin DSM 6.0 Beta and Data Protection Managerin DSM 5.2.
Shared Folder Snapshot
Take a snapshot of shared folders up to every 5 minutes.
View snapshot data in all file services or File Station, or by clicking the Previous Versions tab in the Properties dialogue box in File Explorer on Windows PC.
Increase the maximum snapshot versions of a shared folder to 1024 for all currently available models (except for DS216+ on which the number is limited to 256).
Limit the maximum snapshot versions of all the shared folders to 65536 for all currently available models (except for DS216+ on which the number is limited to 4096).
Supports shared folders located on Btrfs volumes.
Shared Folder & LUN Replication
Replicate your data in shared folders and iSCSI LUNs from one server to another by taking and sending a snapshot to the remote server.
Extend a replication by replicating data from a destination server to another secondary destination server to make multiple copies of your data.
Replicate one shared folder or iSCSI LUN to up to 3 destination servers from the same source server.
Limit the maximum number of replication tasks to 64.
Statistics of transferred size and sync duration are recorded and displayed as a report.
Allows administrator users to export the replicated data to external devices, and then deliver and import it to the recovery site, reducing bandwidth usage in your production environment.
Provides an overview topology to show how your replicas are stored.
Supports port forwarding by customizing address and port of a replication task.
Now you can encrypt replication transmission.
iSCSI LUN replication can be managed via Synology Snapshot Replication or VMware vCenter Site Recovery Manager. (Installing Synology SRA on VMware Site Recovery Manager servers is required.)
Only Advanced iSCSI LUNs and shared folders on Btrfs volumes are supported.
Recovery
You can perform a failover on shared folders or iSCSI LUNs by making the replicas on the destination server writable when the source server is not healthy.
You can perform a test failover to make a clone and run all necessary tests in the event of disaster.
You can perform a force failover when the source server is healthy.
After performing a failover, you can perform a re-protect action to sync data on two servers again.
When performing a re-protect action, you can choose either of the servers to sync data from and choose the new source server for the replication task.
Available on the following models:
16-series: RS2416RP+, RS2416+, RS18016xs+, DS716+, DS216+
15-series: RC18015xs+, RS815RP+, RS815+, DS3615xs, DS2415+, DS1815+, DS1515+, DS415+
14-series: RS3614xs+, RS3614xs, RS3614RPxs
13-series: RS3413xs+, RS10613xs+
12-series: DS3612xs, RS3412xs, RS3412RPxs
11-series: DS3611xs, RS3411xs, RS3411RPxs
MailPlus Server (Beta)
Please note that the Beta program will continue after DSM 6.0 official release.
Starting from MailPlus Server 1.0 official release, MailPlus Server will include 5 free mail accounts by default, and licenses will be required for additional mail accounts. During the Beta program, no licenses will be required for any email accounts.
MailPlus Server provides enterprise-grade mail server features and advanced active-active architecture, allowing administrator to set up a high-availability mail system with single server fault-tolerance and load-balancing abilities.
Active-active mechanism ensures two-way syncing of data between both servers to maximize the uptime for the mail system.
Load balancer smartly distributes incoming messages to ensure that the loadings on the two nodes are evenly balanced.
The specially designed algorithm allows you to search email content with a given keyword for an even more accurate result.
The spam-filter has a much enhanced anti-spam ability, especially for Chinese spams, by using implemented algorithm to analyze the meaning of the statement.
Customize spam filters by keywords for precise spam blocking.
The migration from the existing Mail Server to MailPlus Server is made seamless to let you continue using the previously hosted mail service.
Supports application backup in the Hyper Backup package.
Enhanced anti-malware and anti-virus protection by integrating Google Safe Browsing and third-party database.
Message Content Protection (MCP) allows you to filter or block the mails that match MCP rules.
Penpal auto whitelisting mechanism ensures that the mails from the contacted senders will not be marked as spam.
You can forward mail logs to both the server not being used as load balancer in the mail cluster for log backup and the syslog server for centralized log management.
You can now disable full-text search for selected accounts to utilize the server resources.
Usage analysis provides an efficient way to calculate email quantity of the selected users, allowing the administrators to easily monitor the mail traffic by accounts.
MailPlus Server will be available on the following models:
16-series: RS18016xs+, RS2416+, RS2416RP+, DS716+, DS216+
15-series: RC18015xs+, DS3615xs, DS2415+, DS1815+, DS1515+, RS815+, RS815RP+, DS415+
14-series: RS3614xs+, RS3614xs, RS3614RPxs, RS2414+, RS2414RP+, RS814+, RS814RP+
13-series: DS2413+, RS10613xs+, RS3413xs+, DS1813+, DS1513+, DS713+
12-series: DS3612xs, RS3412xs, RS3412RPxs, RS2212+, RS2212RP+, DS1812+, DS1512+, RS812+, RS812RP+, DS412+, DS712+
11-series: DS3611xs, DS2411+, RS3411xs, RS3411RPxs, RS2211+, RS2211RP+, DS1511+, DS411+II, DS411+
MailPlus (Beta)
Please note that the Beta program will continue after DSM 6.0 official release.
MailPlus is a powerful webmail service that provides rich features. The beautifully designed user interface and functionality help you work intuitively on your everyday email with efficiency.
Organize your email with the physical mailboxes or assign multiple attributes onto the email by applying labels for an intuitive and convenient email management.
Send and receive mail to and from other mail servers with the customizable SMTP service and POP3 fetch function.
Find and manage your email efficiently with the smart search function.
Filters automatically moves your incoming or outgoing email to the appointed mailbox or applies labels.
Customize wallpaper and theme settings.
Enrich your email content with the built-in stickers.
With Synology Web Clipper, you can easily save the conversation in MailPlus to Note Station for management.
Supports attaching files from DSM.
Supports undo operation for Delete/Move/Archive/Set read & unread/Apply & remove label actions.
Customize auto-reply messages for different senders.
Supports browsing history.
You can now auto-empty Spam/Trash mailboxes on logout.
Clip long email messages to shorten loading time.
List email addresses according to contact frequency when specifying the sender/recipient.
Group contacts will be displayed when specifying the sender/recipient in the mail composer.
Task progress will be displayed after setting up the filters.
Supports keyboard shortcuts to view and manage messages more efficiently.
Overall performance enhancement including improved email loading and deleting performance.
MailPlus will be available on the following models:
16-series: RS18016xs+, RS2416+, RS2416RP+, DS716+, DS216+
15-series: RC18015xs+, DS3615xs, DS2415+, DS1815+, DS1515+, RS815+, RS815RP+, DS415+
14-series: RS3614xs+, RS3614xs, RS3614RPxs, RS2414+, RS2414RP+, RS814+, RS814RP+
13-series: DS2413+, RS10613xs+, RS3413xs+, DS1813+, DS1513+, DS713+
12-series: DS3612xs, RS3412xs, RS3412RPxs, RS2212+, RS2212RP+, DS1812+, DS1512+, RS812+, RS812RP+, DS412+, DS712+
11-series: DS3611xs, DS2411+, RS3411xs, RS3411RPxs, RS2211+, RS2211RP+, DS1511+, DS411+II, DS411+
SpreadSheet
Allows you to host your collaboration drive and work easily with others by sharing spreadsheets.
Customize access permissions for guests, DSM users and groups, and set read/write privileges for specific spreadsheets.
Multiple users can edit the same spreadsheet simultaneously and see the modifications in real time.
View the revision history and restore the spreadsheet to a previous version.
Manage your spreadsheets with multiple attributes by adding tags to individual spreadsheets and quickly find them later.
Supports import and export of other spreadsheet formats.
Supports data validation, conditional formatting, filter and spelling check.
Spreadsheet encryption is supported to protect confidential spreadsheets.
Supports application backup in the Hyper Backup package.
Range selection is supported in SpreadSheet functions.
Supports selecting multiple rows/columns/cells by pressing and holding the "Ctrl" key.
Over 300 formulas are supported.
SpreadSheet Function List is provided with instructions on frequently used functions and usage examples.
Allows you to insert images to spreadsheets.
You can now print your spreadsheets.
SpreadSheet will not be available on the following models due to the restriction of Node.js version:
13-series: DS213, DS213air, DS413j, DS213+, DS413
12-series: DS112, DS112+, DS112j, DS212, DS212+, DS212j, RS212, RS812
11-series: DS111, DS211, DS211+, DS211j, DS411, DS411j, DS411slim, RS411
Surveillance Station 7.2
Surveillance Station has been optimized for models based on Intel 64-bit processors to improve general performance.
Added support for I/O modules from Advantech ADAM-6050, ADAM-6052, ADAM-6250, ADAM-6266 and AXIS P8221.
Added support for running Surveillance Station on both Virtual DSM and Docker DSM. (Please note that Surveillance Station running on Virtual DSM or Docker DSM does not include any default surveillance device licenses.)
Added support for 2-step verification using one-time password (OTP) for DSM 6.0 to provide extra security.
PetaSpace
PetaSpace is an application that combines the capacity of multiple volumes into a larger volume group. With PetaSpace, data of a single shared folder can now be located across multiple volumes, thus allowing you to store, manage, and access the growing amount of data more efficiently and flexibly.
X
Topic: verwachte relase datum DSM 6.0 (gelezen 9859 keer)
Vergelijkbare onderwerpen (2)
29 december 2013, 01:23:23